In order to remove the cutting marks on the surface of the 6H-SiC cutting wafer, to investigate the mechanism ofthe abra......

采用雾化施液化学机械抛光(CMP)的方法, 以材料去除速率和表面粗糙度为评价指标, 选取最适合硒化锌抛光的磨料, 通过单因素实验对......

The wear interaction of cementite and pearlite in the white cast iron(WCI)was investigated using the two-body abrasive w......

An elastic—plastic wear model for metal abrasion has been built up based on comparingthe dry abrasion behavior and hig......

Caterpillar construction machines play an important part in many fields such as hydraulic and electric engineering, the ......

An experimental investigation is carried out to machine SiC ceramic material through the method of high speed plane lapp......

The low-energy, multi-impact fracture resistance and the abrasiveness of the cross-rolled low alloy white cast iron grin......

磨料(abrasive)在磨削、研磨和抛光中起切削作用的颗粒状材料。磨料主要用于制造磨具,也可以直接用于某些研磨和抛光工作。磨料应......

moJu磨具(abrasive tool)用以磨削、研磨和抛光的工具。大部分是用磨料加上结合剂制成的人造磨具,也有用天然矿岩直接加工成的天......

The composition of the polishing solution is optimized by investigating the impact of the WIWNU (the so-called within-wa......

Nd-doped phosphate glass is the dominant amplifier material used in solid state high average power laser systems.Surface......

The cavitation abrasive water jet was used in the comminution of mica. By applying a cavitation nozzle in the abrasive w......

ＤＩＳＣＵＳＳＩＮＧＯＮＳＯＬＩＤＡＢＲＡＳＩＶＥＬＡＰＰＩＮＧＰＡＴＨＹａｎｇＪｉａｎｄｏｎｇ，ＷｅｎＸｕｅｈｅｎｇＣｈａｎｇｃｈｕｎＩｎｓｔｉｔｕｔｅｏｆＯｐｔｉｃｓａｎｄＦｉｎｅＭｅｃｈａｎｉｃｓＺｈｕＹａｎｑｉｕ，ＷａｎｇＬｉｊｉａｎｇＪｉｌ... DISCUSSINGONSOLIDABRASIVELAPPINGPATHYangJiandong, WenXuehengChangchunInstituteofOpticsandFineMechanicsZhuYanqiu, Wa......

A novel alkaline copper slurry that possesses a relatively high planarization performance is investigated under a low ab......

We propose the action mechanism of Cu chemical mechanical planarization(CMP) in an alkaline solution.Meanwhile,the effec......

An abrasive free chemical mechanical planarization(AFCMP) of semi-polar(1122) Al N surface has been demonstrated. The ef......

The effects of subsurface hardness on wear-resistance of martensitic steel 20Cr, 40CrSi, 60Mn, T8 and T10 in three-body ......

A new idea for designing wheel patterns is presented so as to solve the problems about machining accuracy ofworkpiece a......

The effects of laser hardening parameters such as beam power, beam diameter and scanning rate on microstructure and hard......

Effects of abrasive concentration on material removal rate(MRR) and surface quality in the chemical mechanical polishing......

At the present time in china, the binder used in tungsten carbide composite button is mainly cobalt, which is very expen......

The abrasive wear characteristics of Al2O3/PA1010 composite coatings on the surface of quenched and low-temperature tem......

The roller-scraper tribosystem of automatic teller machine(ATM) plays an important role in reliable cash requests.Howeve......

The tribological properties of ZrO2 ceramic and 1Cr18Ni9Ti stainless steel rubbing pairs were investigated using a speci......

By applying electromagnetic field to a system consisting of tungsten wires and grey cast iron melt,the grey cast iron ma......

Full factorial design of experiments was developed in order to investigate the effects of jet pressure, abrasive mixing ......

In situ A356-x%PVF (particle volume fraction) ZrB2 ( x=1, 3, 5) composites were prepared via magneto-chemistry in situ r......

Fly ash/A1-Mg composites are fabricated by powder metallurgical method. The morphology and structure of fl y ash/A1-Mg c......

The microstructure, tensile property and wear resistance of 7075 aluminum matrix composite reinforced with TiC particles......

The sliding wear behavior of hypoeutectic, eutectic and hypereutectic Al - Si alloys under lubricating condition was in......

Mechanical properties of carbon films deposited by plasma polymerization on different sub-strates were studied.Film har......

The high temperature tribological properties of metal-based ceramic coating containingoxidation under dry wear conditio......

Application of powder boronizing to mechanical industry has been restricted because of the brittleness of boronized laye......

A coating with high hardness, wear and oxidation resistance was prepared by electric arc spray. The hardness, bonding st......

Weight-loss trials and potentiodynamic polarization curves have been used to study the inhibitive properties of alkylpo......

In this paper, we deposited carbides on copper substrate by High velocity oxy-fuel (HVOF) spraying. The structure of the......

Through the experiment and analysis with five kinds of plain bearing material and twokinds of journal material which we......

The influence of lubricant conditions, wear loads, and counterparts on the friction and wear characteristics of an MoSi......

Molecular dynamics method is applied to study the machining mechanisms of polishing based on coupling vibrations of liqu......

In this paper, some samples of Al-Si alloy with various silicon content were treated by laser beam. The effects on stru......

Based on the two existing abrasive water-jet(AWJ) systems, the dia-jet (or pre-jet) and the post-jet, a new type of abra......

To make clear the wear conditions of ATM (Automatic Teller Machine) tribosystem when servicing in Chi- nese sand dust en......

The influences of the polishing slurry composition,such as the pH value,the abrasive size and its concentration,the disp......

According to the critical size ratio for the characteristic particle size to film thickness between grinding wheel and w......

Chemical mechanical planarization(CMP) is a critical process in deep sub-micron integrated circuit manufacturing. This s......

This paper presents a new kind of CVD diamond graver for stone machining. Taking granite as machining object,we studied ......

Material removal mechanism under non-contact condition between the pad and the wafer in the chemical mechanical polishin......

The introduction of surface engineering is expected to be an effective strategy against fretting damage. A large number ......

In this study,the effects of various surface treatments on the friction and wear behavior of AISI 4140 steel have been e......

The Microstructure and room temperature abrasive wear resistance of chromium carbide reinforced Ni3Al matrix composite c......